Arm

The first-ever compression sleeve with vibration for on-the-go relief.

Key Product Features

Find the tag with the circular Therabody logo in your arm sleeve. It should land in the center of the shoulder facing outwards once the sleeve is properly placed
Slide your left or right arm into the sleeve, pulling up steadily and gently.
Make sure the sleeve is placed correctly: circular Therabody logo tag is centered on your shoulder facing outwards and the battery pocket is easily accessible below the tag. The Therabody logo should be on top of your forearm, next to the outside part of your wrist.
Insert the battery in the pocket. Make sure the golden connectors are facing down and the Therabody logo on the battery faces outwards.
Firmly press the button below the battery for 2 seconds to turn on the vibration therapy.
Press the button again to cycle through our different vibration therapy modes.
Firmly press the button again for 2 seconds to turn off the device.

Put the RecoveryPulse Arm on either the right or left arm. You will know the sleeve is on correctly when the logo is facing up and out.
Once in a comfortable position, turn ON the integrated vibration motors by firmly pressing and holding the button for 2 seconds.
Press the button again to toggle through the range of vibration frequencies. Adjust the vibration frequency as needed.
To turn OFF the RecoveryPulse Arm, firmly press and hold the button for 2 seconds.

Mode	Mode Details
Mode 1: Low	Vibration therapy at low frequency for general recovery and pain relief.
Mode 2: High	Vibration therapy at high frequency for warm ups and exercise recovery.
Mode 3: Wave	A tailored pattern from low to high frequency to maximize the contrast and stimulation to the nervous system, for relaxation and wellness.

RecoveryPulse Arm is USB-C enabled and comes with a charging cable. Before charging the device, ensure the device is powered off.

Connect one end of the charging charging cable to the USB-C charging port on the device located on the side of the device, behind the power button.
Connect other end to your USB-A power adapter. (not included)
The LED indicator on the battery pack, next to the USB-C port will indicate the battery status.
The LED battery level indicator will flash when properly connected until fully charged.
Turn on the device to check the battery status.
- Red: Low charge
- Blue: Medium charge
- Green: Full charge

Do not bleach, do not tumble dry, do not dry clean, do not iron.

Remove the battery before washing.
Place the RecoveryPulse sleeve in the provided laundry bag and machine wash on delicate mode with temperatures below 30ºC/80ºF.
After washing, lay flat to dry. Do NOT machine dry the RecoveryPulse sleeve.
Make sure the RecoveryPulse sleeve is completely dry before re-inserting the battery

Battery Life	45 minutes
Weight	196g/6.8oz. with battery
Size	Available in multiple sizes, see sizing chart for best fit
Dimensions	47 X 52 X 11mm (Battery size)
Material	70% Germanium polyester, 30% Nylon/Spandex