MaskUpdated 2 days ago
Shop TheraFace Mask
An award-winning, FDA cleared LED skincare mask with vibration therapy.
Key Product Features
- Red Light: Helps reduce fine lines + wrinkles and firm the skin
- Red + Infrared Light: Helps reduce dark spots and improve radiance
- Blue Light: Targets acne and fights acne-causing bacteria
- 17 proprietary QX-Micro Motors deliver massaging vibration therapy to key pressure points on the face and scalp to promote relaxation and stress relief
What's included in box?
- TheraFace Mask device
- Removable Protective Eye Shields
- Display Stand
- Adapter - UBS-A+C to USB-C
Using Your Device
Before beginning your treatment charge your TheraFace Mask and begin with a clean, dry face.
- Slide the TheraFace Mask eyeshield into the mask through the protrusions that meet near the nose. Use of the eyeshield is optional. Using the eyeshield can reduce strain on the eyes from the light. If you choose not to use the eyeshield, keep your eyes closed throughout your treatment. Do not look into LED lights during treatment. *Normal use of TheraFace Mask eyeshields may result in redness around your eye area. Some redness is normal and should subside within 5-10 minutes of using TheraFace Mask.
- Place the device on your face, and adjust both of the Velcro straps to your desired fit.
- To turn on the device, either Long press the LED button (G) to turn ON LED light + vibration, or the vibration button (H) to turn ON vibration only.
- Short press the vibration button (H) or LED button to toggle through each vibration mode (Continuous, Breathing, and Wave).
LED Therapy
The TheraFace Mask has three LED light therapy wavelength options: Red, Red + Infrared, Blue. Long press the LED button (G) to turn ON the LED light and vibration. This will turn on the 648 multi-color LED lights around the face, the eight vibration motors around the eyes, and the nine vibration motors on the top and back of the head. Face and head vibration therapy accompanies LED light treatment during Red and Red + Infrared treatment. Only head vibration therapy is available during Blue Light treatment.
When you turn ON the device, it will begin an automatic Red Light + vibration treatment. In this mode, the device will guide you through a science-backed treatment that cycles through Red (3 minutes), Red + Infrared (3 minutes), and Blue (3 minutes) light therapy in combination with vibration patterns, for a 9-minute treatment.
Short press the LED button (G) to toggle through each of the three LED light modes (Red, Red + Infrared, Blue). Each LED light mode is a 3-minute treatment. Short press the vibration button (H) to toggle through each of the three vibration pattern modes (Continuous, Breathing, and Wave). Long press the LED button (G) to power the device OFF.
Vibration Therapy
Long press the vibration button (H) to turn ON vibration only. This will turn on the eight vibration motors around the eyes and the nine vibration motors on the top and back of the head. When you turn ON the device, it will begin on the Continuous mode. Short press the vibration button (H) to toggle through each of the three vibration pattern modes (Continuous, Breathing, and Wave). The treatment time is 15 minutes.
Short press the vibration button (H) to reach the second vibration mode, Breathing. Allow the motors to guide you through a breathing exercise. First, breathe in for five seconds as the vibration intensity increases. The high-speed vibration is your cue to begin to exhale. Continue to exhale as the vibration gradually slows.
Short press the vibration button (H) to reach the third vibration mode, Wave. Sequential vibration patterns will move from face to head during the Wave treatment. Long press the vibration button (H) to power the device OFF.
Charging and LED Indicator Guide
The TheraFace Mask is USB-C enabled and comes with a charging cable. Before charging, ensure the device is powered off. To power off long press the LED button (G) or vibration button (H). Do not try to use the device while charging.
- Connect the TheraFace Mask to the USB-C cable, the port is located inside of the mask.
- Connect other end to power adapter. (not included)
- The LED light located next to the USB-C port will flash to indicate the device is connected properly and charging.
- To check the battery level, short press the LED light button (G) or vibration button (H).
- Orange: Low-charge
- Blue: Mid-charge
- Green: Full-charge
Care and Cleaning
- The TheraFace Mask is not waterproof. Do not submerge the device in water or clean it under running water. Do not apply excessive cleaning solution.
- For everyday use, wipe the base of the device with a damp cloth or alcohol-free cleansing wipe.
- Wipe off any visible dirt with a disposable cloth moistened with a mild detergent. Be sure to wipe the interior surfaces of the mask.
- Use a soft cloth stained with 70% isopropyl alcohol to wipe and disinfect the mask for three (3) minutes, especially the inner surface of the mask.
- Repeat this process three times.
- Finally, wipe the disinfectant with a clean, dry cloth or towel until there is no visible residue.
- After cleaning, allow the device the dry thoroughly before storing or beginning another treatment.
Specifications
Battery Life |
|
| Weight |
|
Dimensions |
|
| Material |
|