Cube

Instant heat, cold and contrast therapy for targeted pain relief in one compact, portable device.

Key Product Features

FDA-Cleared Type II Medical Device
Precise, safe, and science backed temperatures using Cryothermal™ Technology
Hands-free or handheld design
Adjustable straps to wear anywhere on the body
3 preset modes each with multiple precise temperature settings
- Heat: 24 minutes
- Cold: 18 minutes
- Contrast therapy

Securely rest the device on the intended treatment areas, long press either the cold or hot button to power the device on and begin treatment
If placing the device on the intended treatment area makes the cold and hot buttons out of reach, power on and chose your treatment first.
Long press the cold (snowflake) button to begin the cold treatment.
- The cold button will illuminate as blue as the cold treatment begins
- Short press the cold button at any point during treatment to toggle through the treatment options
Long press the hot (heat waive) button to begin the hot treatment.
- The hot button will illuminate as orange as the hot treatment begins
- Short press the hot button at any point during treatment to toggle through treatment options
Simultaneously long press both the bold and hot buttons to reach contrast mode.
- Both the hot and cold buttons will illuminate as the contrast treatment begins
- Short press the cold or hot button at any point during treatment to toggle through temperature options
Treatment times do not reset when the treatment temperature is changed.
Treatment times do reset when swiching between hot and cold treatment.
The device will power off once the treatment is complete
Long press the cold or hot button to turn off the device.

Reduces muscle pain and soreness as well as muscle and joint stiffness.

Decrease inflammation and swelling. Treat acute injury to reduce pain, inflammation, and swelling.

Maximize muscle recover and performance as well as post-exercise recovery.

Mode	1 LED Light	2 LED Lights	3 LED Lights
Hot Mode: 24 Minutes Short Press the hot button to toggle between three temperature options	95°F / 35°C This is the default temperature	102°F / 39°C	109°F / 43°C
Cold Mode: 18 Minutes Short Press cold button to toggle between three temperature options	61°F/16°C This is the default temperature	54°F / 12°C	46°F / 8°C

Mode	Step 1	Step 2	Step 3	Step 4
Contrast Mode: 20 Minutes Simultaneously long press both hot and cold buttons to begin contrast treatment Short press the temperature buttons to toggle through temperature options	5 minutes Cold 46°F / 8°C	5 Minutes Hot 109°F / 43°C	5 minutes Cold 46°F / 8°C	5 Minutes Hot 109°F / 43°C

RecoveryTherm Cube is USB-C enabled and comes with a charging cable. Before charging the device, ensure the device is powered off.

Connect one end of the charging cable to the USB-C charging port on the device located on the side of the device, behind the power button.
Connect other end to your USB-A power adapter. (not included)
The LED light, on the right-hand side of the USB-C port will indicate the battery status.
The LED battery level indicator will flash when properly connected until fully charged.
Turn on the device to check the battery status.
- Orange: Low battery
- Blue: Medium battery
- Green: Full battery

RecoveryTherm Cube is NOT waterproof or machine washable. Do not allow any liquid or water to enter the device or air vents. Ensure the device is powered off before cleaning.
To clean, wipe the inner surface of the strap with a dampened microfiber cloth.
Wipe down the device, strap case, and straps completely.

Battery Life	120 minutes for Heat and Cold 60 minutes for Contrast
Weight	Device, case, two straps: 450 g Device: 345 g Case for Strap Attachment: 20 g Long Strap: 50 g Short Strap: 35 g
Size	One size fits all
Dimensions	4 in X 7.8in X 3.7in 104mm X 200mm X 94mm
Temperature	Heat 95°F / 35°C, 102°F / 39°C, 109°F / 43°C Cold 61°F / 16°C, 54°F / 12°C, 46°F / 8°C
Material	Housing: plastic (PC+ABS) and aluminum of the active area Case: plastic (PC+ABC) and silicone Strap: Neoprene and Velcro